Ready To Fly
Parts & DIY
Batteries & Chargers
Night flying & LED
Motors, ESC, Props
Tweets by @jDronesDev
Join our mailing list!
Official partner and parts manufacturer for
DIY Drones community
Stock Status:(Out of Stock, usually arrives every 2 weeks)
Usually Ships in 1 to 2 Business Days
Email me when Back-In-Stock
Wishpot add this item to your
New Portable Open-Source Ground Station (Arduino and Xbee Based).
Your robot's best friend!
NOTE: Some assembly required!
-Telemetry protocol and data display explanations
Atmega328 at 16Mhz with Arduino Bootloader.
XBee Socket and 3.3V powered (I've included some holes near to the antenna so you can hold it with a strap).
Wireless programing: You can use XBEE to program it (needs 2n2222 transistor available at any radioshack).
Can be powered with 2 and 3 cell LIPOS (diode protected and regulated).
Huge 4 line screen with backlight, very clear under the sun! (2 pots to control the backlight and contrast).
FTDI port to upload code, also the boards is ready to be programmed with XBee.
Six button to navigate and change screen and options.
Very noisy buzzer that can be used to alert you when it has low battery or low altitude.
6 I/O analog pins available, including the I2C port.
2 powered SERVO OUTPUTS (Tilt & Pan) that can be used to control a directional antenna (NICE!).
Extra 3.3V and 5V volts outputs.
The software is ArduPilot compatible and Open Source.
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
Sign up for our newsletter:
Shippings & Returns
Terms & Conditions
Ecommerce Web Site Design by