UAV Systems


Accessories

Latest Tweets


    Join our mailing list!









    Official partner and parts manufacturer for DIY Drones community.
    You are here: Home > Video & FPV
    Video Cables, Harnesses Video Electronics Video Antennas Video Cameras Video Transmitters

    Sony 1/3" Super HAD 550 Lines camera, PAL Boscam HD19 Aerial HD FPV camerarecorder Sony 1/3" Super HAD 700 Lines camera, PAL
    Our Price: 94.00
    Our Price: 139.99
    Our Price: 124.00
    Sony 550TVL Camera Boscam HD19 HD FPV camera Sony 700TVL Camera
    Highquality video camera for all your FPV needs. Sony 550 Lines gives crispy video feed for you. Operating voltage 12v / 120mAh (or less) Boscam HD19 Aerial HD FPV camerarecorder.  Your ultimate FPV true HD camerarecorder. 1080p 30fps, 720p 60fps Highquality video camera for all your FPV needs. Sony 700 Lines gives crispy video feed for you. Operating voltage 12v / 120mAh (or less)
    Video Power, 13-24 In, 12V Out, 2A jD-MiniOSD v1.2 MAVLink compatible OSD 7" Standalone FPV display with 5.8Ghz Diversity receivers
    List Price: $19.95
    Our Price: 19.95
    Our Price: 39.95
    Our Price: 229.95
    12V Video power unit jD-MiniOSD, MAX7456 7" 5.8Ghz Diversity display
    12V/2A Linear video power unit for 4-6S battery operation. This PSU gives nice and ripple fee 12V output to your FPV video equipment. You can use 4-6S (13-24V) batteries to power this PSU and connect your FPV transmitter, camera etc on it's outputs. jD-MiniOSD v1.2, improved OSD from MinimOSD. This OSD has stepdown DC/DC powersupply that can handle input voltages up to 40 volts, Additional pins for 12V power supply, Analog pins for RSSI and many more upgrades.. Fully compatible with MinimOSD software and configurator tools. It has full support for MAVLink 1.0 Best standalone 7" FPV display with Diversity receiver (2 x 32Ch 5.8Ghz receivers with automatic RSSI detection). This fully featured display is easy to mount on every camera tripod and as it has it's own internal power supply you don't need to add any cables to it. Just switch it on and start using it. Automatic diversity electronics will choose best reception for you.
    7" LCD Mount for RC Controller GoPro FPV+Power cable, Super slim Audio/Video transmitter 5.8Ghz, 800mW
    Our Price: 15.95
    Our Price: 6.00
    Our Price: 48.50
    FPV LCD Mount for RC Controllers Super Slim Video and Power Cable For GoPro Hero 3 or 4 TX58-800 5.8GHz AV transmitter, 800mW
    Easy way to mount your FPV LCD directly to your RC controller. No need to use any tripods or anything else when flying alone. Have your LCD display always on your eye sight.
    Super Slim Video and Power Cable For GoPro Hero 3 or 4

    Make FPV simple. Use this cable to get live video feed from your GoPro Hero 3 or 4 at the same time when the camera is recording in HD. The cable also allows you to charge or provide power to your GoPro.

    The USB connector board is angled and very slim so it does not get in the way of mounting your camera. Board has a hole for attaching directly e.g. to a suitable Tarot gimbal, screw included. Cable length 23cm.

    TX58-800 5.8GHz Audio/Video transmitter, 800mW. Connect a GoPro or other camera to this transmitter and start sending video and audio from your UAV/drone.
    Audio/Video receiver 5.8Ghz
    Our Price: 66.00
    RX-5822 5.8GHz Audio/Video receiver
    RX-5822 5.8GHz Audio/Video receiver. Use together with TX58-800 5.8GHz AV transmitter to receive video and audio from your UAV/drone.

    Copyright © jDrones & Co.. All Rights Reserved.
    Built with Volusion.