UAV Systems


Latest Tweets

    Join our mailing list!

    Official partner and parts manufacturer for DIY Drones community.

      Home > Electronics >

    jD-IOBoard v1.0, MCU controlled IO Board for driving LEDs, Relays, Servos
    jD IOBoard with High power outputs

    Alternative Views:

    Our Price: $16.00

    Stock Status:(Out of Stock, usually arrives every 2 weeks)
    Availability:: Usually Ships in 1 to 2 Days
    Product Code: JDIOBOARD10

    jD-IOBoard v1.0, Driver board for your needs

    If you need to drive LED strips, LEDs, Lamps, Relays or similar devices jD-IOBoard is the answer for your needs. This board is fully Arduino compatible board and it has 6 high power outputs and can handle all the way 42 Volts and 500mA / output pin.

    Board have easy access to FTDI / UART and I2C ports. Among high power outputs there are several TTL level GPIO pins and Analog pins. 

    NOTE! This old board and discontinued, please use our jD-IOBoard v1.1. If you happened to order this lately, your board will be automatically updated to v1.1. jD-IOBoard v1.1 is here

    Technical data:
    • Atmega 328P MCU
    • ULN2003A darlington array for high power outputs
    • 6 x TTL GPIO pins
    • 6 x TTL Analog pins (only 4 if using I2C bus)
    • FTDI connector
    • ISP pins for deep programming
    • Size: 37mm x 18mm

    Assembly and usage documentation in jDoc - jD-IOBoard

    Source codes etc in Google Arducodes repository

    Browse for more products in the same category as this item:

    jD-ArduCopter > ArduCopter - Electronics
    jD-ArduCopter > ArduCopter - Upgrades
    Electronics > Robotics
    Hardware parts > Night flying & LED

    Copyright © jDrones & Co.. All Rights Reserved.
    Built with Volusion.