UAV Systems


Accessories

Latest Tweets


    Join our mailing list!









    Official partner and parts manufacturer for DIY Drones community.
    You are here: Home > Multicopter kits > jD-ArduCopter > ArduCopter - Upgrades
    Sort By:
    Page of 2
    Telemetry cable, 4 pin, 10cm
    Telemetry cable, 4 pin, 10cm
    Our Price: $1.95

    Connect XBee adapter board easily to your ArduPilot Mega IMU board
    Sonar cable, 3 pin, 24cm
    Sonar cable, 3 pin, 24cm
    Our Price: $2.00

    Connect sonar to ArduPilotMega IMU board easily with this special made jumper cable.
    Radio cable, 10 cm, 7pin -> 7 x 1pin
    Radio cable, 10 cm, 7pin -> 7 x 1pin
    Our Price: $2.10

    Connect your receiver, sonar or radio easily with this special made jumper cable.
    Radio cable, 10 cm, 8pin -> 8 x 1pin
    Radio cable, 10 cm, 8pin -> 8 x 1pin
    Our Price: $2.25

    Connect your receiver easily with this special made jumper cable.

    Dome Center Upgrade SET
    Dome Center Upgrade SET
    Our Price: $5.50

    ArduCopter DomeCenter Upgrade SET. New style Dome Center
    Maxbotix Sonar mount for ArduCopter, v1.0
    Maxbotix Sonar mount for ArduCopter, v1.0
    Our Price: $5.80

    ArduCopter sonar mount for Maxbotix sonars. Can be mounted on different frames too.
    jDrones 5V/3A Low noise uBEC
    jDrones custom low noise 5V/3Amp tested uBEC
    Our Price: $7.40

    Custom made low noise 5V/3Amp uBEC. This uBEC has tested 3Amp output and even close to maximum output it's ripple currents are kept really low.
    ArduCopter Highrise landing gear 20cm
    ArduCopter Highrise landing gear 20cm
    Our Price: $9.00

    Highrise landing gear for ArduCopter Tri, Quad and Hexa frames. This landing gear gives 20cm of space below motor arms.
    ArduCopter HighRise Landinggear
    ArduCopter Highrise landing gear 25cm
    Our Price: $10.50

    Highrise landing gear for ArduCopter Tri, Quad and Hexa frames. This landing gear gives 20cm of space below motor arms.
    jD IOBoard with High power outputs
    jD-IOBoard v1.1, MCU controlled IO Board for driving LEDs, Relays, Servos
    Our Price: $18.00

    jD-IOBoard v1.1. Fully Arduino compatible IOBoard with 6 high power outputs and 6 TTL GPIO channels along analog powers. Best way to drive your LED strips and other devices.
       
     

    Copyright © jDrones & Co.. All Rights Reserved.
    Built with Volusion.