UAV Systems


Accessories

Latest Tweets


    Join our mailing list!









    Official partner and parts manufacturer for DIY Drones community.
    You are here: Home > Multicopter kits > jD-ArduCopter
    Choose a sub category:
    ArduCopter - Parts ArduCopter - Kits
    ArduCopter - Electronics ArduCopter - Frames
    ArduCopter - Upgrades
    Original ArduCopter that was created by jDrones. Parts, Kits and upgrades
    Sort By:
    Page of 3
    Extremely strong velcro patch, 6 x 8 cm Radio cable, 10 cm, 6pin -> 6 x 1pin Telemetry cable, 4 pin, 10cm
    Our Price: $1.50
    more info
    Our Price: $1.95
    more info
    Our Price: $1.95
    more info
    Extremely Strong Velcro Radio cable, 10 cm, 6pin -> 6 x 1pin Telemetry cable, 4 pin, 10cm
    Nylon Screw M3 x 10mm, 10 pcs, Natural color Connect your receiver, sonar or radio telemetry modem easily with this special made jumper cable. Connect XBee adapter board easily to your ArduPilot Mega IMU board
    Sonar cable, 3 pin, 24cm Radio cable, 10 cm, 7pin -> 7 x 1pin Radio cable, 10 cm, 8pin -> 8 x 1pin
    Our Price: $2.00
    more info
    Our Price: $2.10
    more info
    Our Price: $2.25
    more info
    Sonar cable, 3 pin, 24cm Radio cable, 10 cm, 7pin -> 7 x 1pin Radio cable, 10 cm, 8pin -> 8 x 1pin
    Connect sonar to ArduPilotMega IMU board easily with this special made jumper cable. Connect your receiver, sonar or radio easily with this special made jumper cable.

    Connect your receiver easily with this special made jumper cable.

    Arm 28cm, full holes (T1), extra thin Arm 28cm, "Half holes" (T2), extra thin Arm 28cm, full holes (T1), thick arm
    Our Price: $4.00
    more info
    Our Price: $4.00
    more info
    Our Price: $4.00
    more info
    Arm 28cm, full holes (T1), extra thin Arm 28cm, "Half holes" (T2), extra thin Arm 28cm, full holes (T1), thick arm
    ArduCopter long 28cm arm, style 1. You need 4 of these to make Quad, 6 to make Hexa ArduCopter long 28cm arm, Style 2. You need 4 of these to make Quad, 6 to make Hexa ArduCopter long 28cm arm, style 1. You need 4 of these to make Quad, 6 to make Hexa. This one has 0.9mm thick walls
    ArduCopter 19x19mm arm, Silver, 1 pcs jDrones custom low noise 5V/3Amp tested uBEC ArduCopter 19x19mm arm, Black, 1 pcs
    Our Price: $6.50
    more info
    Our Price: $7.40
    more info
    Our Price: $7.50
    more info
    ArduCopter Arms 19x19 jDrones 5V/3A Low noise uBEC ArduCopter Arms 19x19
    ArduCopter 19x19mm Arms, Fits on jD-Simple frames and also 3DR frames. Silver/Natural Aluminum color Custom made low noise 5V/3Amp uBEC. This uBEC has tested 3Amp output and even close to maximum output it's ripple currents are kept really low. ArduCopter 19x19mm Arms, Fits on jD-Simple frames and also 3DR frames.
       
     

    Copyright © jDrones & Co.. All Rights Reserved.
    Built with Volusion.