UAV Systems


Latest Tweets

    Join our mailing list!

    Official partner and parts manufacturer for DIY Drones community.

      Home > Electronics > Flight controllers >

    Pixhawk 2.1, The Cube
    Pixhawk 2 autopilot firmware board for drones, UAVs, rovers, autopiloted boats or ROVs. pixhawk 2 firmware ,autopilot ,pixhawk ,apm ,flight controller

    Alternative Views:

    Our Price: $259.95

    Stock Status:(Out of Stock, usually arrives every 2 weeks)
    Availability:: Usually Ships in 2 to 3 Business Days
    Product Code: PIXHAWKV2

    Description Technical Specs
    PIXHAWK 2.1 - The Cube: The latest open-source autopilot!

    BESTSELLING FLIGHT CONTROLLER - The latest version with the latest firmware

    World's most advanced autopilot for open autonomous unmanned vehicles. Redundant, temperature controlled, isolated. Greatly improved from the previous version Pixhawk in all aspects.

    - Modular design with total flexibilty on connectivity
    - Increased reliability and reduced integration complexity
    - Comes 100% GPS RTK ready. Multiple GPS capability is standard
    - Pixhawk 2 has a total of 29 MEMS sensors in it
    - 3 x 3-axis Accelerometers
    - 3 x 3-axis Gyroscopes
    - 3 x 3-axis Magnetometers
    - 2 x Barometers


    - 5 serial ports
    - 2 CAN ports
    - 2 I2C ports
    - 2 Power ports
    - 1 ADC port
    - 8 dedicated opto capable PWM out
    - 6 GPIO which can also be used for PWM
    - Dedicated Spektrum RX port
    - S.Bus in and out, PPM in

    Key design points:
    1. Separate Cube with carrier board. Let's users develop their own carrier boards.
    2. Robust interface connectors to make it easy to plug and safer during flight/operation
    3. Airframes VTOL, plane, multicopter, traditional helicopter, rover, boat, submarine, general robotics
    4. Heating system to assure reliability at low temperatures
    5. 3 redundant IMU and up to 3 redundant GPS to make it safer
    6. Fully support Intel Edison module
    7. Standard power brick included with the full kit

    - Modular Cube design
    - Dampened IMU
    - 3 x redundancy IMU
    - Supports Fixed Wings, Multicopters, VTOLs, ROVs, Rovers.
    - CM level GPS
    - Multiple GPS systems
    - Open development environment

    Parts included:
    • Pixhawk 2.1 Cube and carrier board
    • Buzzer
    • Safety switch
    • Power unit
    • Cables (Micro USB, specific DH13 and JH-GST cables)
    • DF13 splitter
    • SD Card adapter
    • Mounting foam
    This carrier board does not include Edison option.

    Browse for more products in the same category as this item:

    Electronics > Flight controllers

    Copyright © jDrones & Co.. All Rights Reserved.
    Built with Volusion.